Vaporesso
This collection holds 77 Vaporesso products covering kits, tanks, replacement pods, coils, spare glass and the brand's own nicotine salt e-liquid. The XROS pod family accounts for the largest share, sitting alongside the Luxe and Armour pod mods, the Target sub ohm platform, the iTank and the GTX and GTi coil ranges. Prices open at £1.99 for replacement bubble glass.
Vaporesso is a mouth to lung specialist first and a high power brand second. The XROS line is one of the most widely used pod families in the UK, largely because it pairs a genuinely tight draw with a top fill pod that does not leak in a pocket. Later XROS pods use the COREX heating design, which the brand introduced to extend pod life. Around that sits a smaller sub ohm range for anyone who wants vapour instead of discretion.
Coil and pod platforms
GTX
GTX is the long running coil platform. It spans a wide resistance range from mouth to lung values above 1.0 ohm down to 0.15 ohm mesh. The platform appears across pod mods, the GTX tank series and several older Target devices. Coils are threaded or press fit depending on the device, so check the base of your pod before ordering.
GTi
GTi is the newer platform built for the iTank and the Luxe XR and Armour generations. It is a mesh only range aimed at restricted direct to lung and full sub ohm vaping. GTi and GTX are not interchangeable despite the similar naming, which is the single most common ordering mistake with this brand.
XROS COREX pods
XROS devices use integrated pods rather than separate coils, so you replace the whole pod. Current stock covers COREX 2.0 and COREX 3.0 pods. Later generations are generally backwards compatible within the XROS family, though the resistance options differ, so match the pod version to your device where you can.
Resistance and wattage
Above 1.0 ohm is mouth to lung. Run it at 10W to 18W with tight airflow and a 50/50 e-liquid such as a 10ml nic salt. Between 0.4 and 0.8 ohm gives a restricted direct to lung draw at roughly 20W to 35W. Below 0.4 ohm is sub ohm mesh, typically 40W to 80W with airflow open and a high VG shortfill at 3mg or 6mg. Start at the low end of the printed range on a new coil and work upwards.
Tanks, glass and 510 fitment
The iTank and the GTX tanks use a standard 510 threaded base, so they fit any regulated 510 mod rather than only Vaporesso ones. Both are top filling with adjustable bottom airflow. Replacement bubble glass is stocked separately, so a cracked glass does not mean a new tank. Check the diameter against your mod's top plate so the tank does not overhang.
The device families
XROS. Slim mouth to lung pod kits, draw activated, top filling. The default recommendation for adults switching from cigarettes. The Cube, Nano, Pro and Pro 2 all sit in this family at different sizes.
Luxe. Pod mods with screens, variable wattage and larger batteries. The XR and XR Max take bigger pods and cover mouth to lung through to sub ohm depending on the coil fitted.
Armour. A more robust pod mod line with a chunkier chassis, running GTi coils.
Target. The sub ohm kit range, built around higher wattage output paired with the iTank.
Priming, coil life and liquid
Prime new coils by dripping e-liquid into the wicking ports until the cotton darkens, then fill and leave the device standing for five minutes. With an integrated XROS pod, fill it and let it sit before the first draw for the same reason. Expect one to two weeks from a coil or pod. Sweet dessert and candy liquids shorten that because the sucralose in them caramelises onto the mesh.
Vaporesso also produces its own nicotine salt line under the DOJOLIQ name in 10ml bottles, which is formulated on a balanced base for pod use. Any 50/50 nic salt at 10mg or 20mg works equally well in an XROS. Sub ohm coils want a high VG shortfill instead.
Buying Vaporesso in the UK
Every device in this collection is rechargeable with a replaceable coil or pod, which is what UK rules have required since the sale of single use vapes ended on 1 June 2025. Nicotine e-liquid is capped at 20mg per ml, nicotine bottles at 10ml and tanks supplied with nicotine liquid at 2ml. Sales are restricted to adults aged 18 and over and every order is age verified. UK delivery is free over £20. For help matching a coil or pod to your device, call 07827 210361 between 8.30am and 4.00pm.
Vaporesso questions answered
What is the difference between GTX and GTi coils?
GTX is the older and broader platform, running from mouth to lung resistances above 1.0 ohm down to 0.15 ohm mesh across pod mods and GTX tanks. GTi is the newer mesh only range built for the iTank and the Luxe XR and Armour generations. The two are not interchangeable, so read the full name on the pack rather than assuming from the first two letters.
Which pods fit the Vaporesso XROS?
XROS devices take integrated pods where the coil is built in, so you replace the pod rather than a separate coil. Current stock covers COREX 2.0 and COREX 3.0 pods. Later generations are broadly backwards compatible within the XROS family, although the resistance options vary between versions, so match the pod to your device generation where possible.
Is the XROS a good first vape for a smoker?
It is one of the most common recommendations for adults switching from cigarettes. The draw is tight and mouth to lung, the device is draw activated so there is no button or menu to learn and the pod fills from the top without dismantling anything. Pair it with a 10ml nicotine salt at 10mg or 20mg rather than a high VG shortfill.
What does COREX mean?
COREX is Vaporesso's name for the heating design used in its later XROS pods. The brand introduced it to improve consistency and to extend how long a pod lasts before the flavour drops off. In practical terms it does not change how you use the device. You still fill the pod, let it stand for five minutes and vape it as normal.
Can I fit a Vaporesso tank to a different brand of mod?
Yes. The iTank and the GTX tanks use the standard 510 threaded connection, so they will screw onto any regulated 510 mod. Two things are worth checking. Make sure the tank diameter does not overhang your mod's top plate. Set the wattage to the range printed on the coil rather than to whatever the mod can deliver.
My tank glass has cracked. Do I need a new tank?
No. Replacement bubble glass is sold separately for the iTank, so a cracked or clouded glass is an inexpensive fix rather than a reason to replace the whole tank. Empty the tank fully before swapping the glass and check the seals while you have it apart.
How long does a Vaporesso coil or pod last?
One to two weeks is normal. Sweet bakery, custard and candy e-liquids cut it down because the sucralose in them caramelises onto the mesh, while fruit and menthol blends are far gentler. A dull or burnt taste, weaker vapour or a harsher draw all mean it is time to change. Priming properly at the start makes a measurable difference.
What e-liquid should I use in a Vaporesso pod kit?
For an XROS or any coil above 1.0 ohm, use a balanced 50/50 blend such as a 10ml nicotine salt at 10mg or 20mg. Vaporesso makes its own DOJOLIQ nic salt line for this, although any 50/50 bottle works. For sub ohm coils below 1.0 ohm on a Target or Luxe setup, use a high VG shortfill at 0mg to 6mg instead.