Best Selling (Tanks & Rebuildables)
This collection surfaces the tanks and rebuildable atomisers that move fastest at Vapestore Direct. It draws on the same 90 product range as the main tanks and rebuildables category, ordered so the proven sellers sit at the front. If you would rather see what other UK vapers are actually fitting to their mods than read through a full catalogue, start here.
What sells consistently in this category tells you something useful. The steady performers are rarely the newest releases. They are the tanks with cheap widely stocked coils, the RDAs with forgiving decks and the RTAs that wick without a fight. Prices in this range currently run from under £3 for a mesh tank up to around £20 for a premium deck.
Why these particular tanks keep selling
Three things drive repeat orders here. The first is coil availability. A tank is only as useful as your ability to buy heads for it in two years' time, which is why the Smok TFV and Innokin Zenith families keep turning over. The second is a forgiving build deck. Rebuildables with clamped post holes and generous juice channels outsell fiddly designs by a wide margin. The third is simply price. Plenty of the strongest sellers here sit under £5.
The categories inside this collection
Sub ohm tanks
These are the volume sellers. A sub ohm tank takes mesh coils below 1.0 ohm, runs from around 40W upwards and produces dense vapour on a direct to lung draw. The Smok TFV9, TFV9 Mini and TFV16 Lite sit in this bracket alongside the Freemax Fireluke 2 and the Wotofo nexMesh Pro. Mesh is the default coil style now because a flat strip heats evenly across its surface.
Mouth to lung and restricted tanks
Innokin's Zenith Pro is a long standing choice for a tight cigarette like draw. The Smok Vape Pen Nord 19 covers similar territory at a lower price. Coils sit above 1.0 ohm, wattage stays low and the airflow adjusts down to a very narrow slot. These pair with 50/50 liquids and nicotine salts rather than thick shortfills.
Rebuildable decks
Wotofo accounts for a large share of the rebuildable side, with the Serpent Elevate RTA, Profile M RTA, COG MTL RTA and Recurve Dual RDA all stocked. The asMODus Blank single coil RDA, the Suicide Mods Nightmare Mini and the Vaperz Cloud Temple 28 cover the higher end of the deck market. Single coil decks are the sensible entry point for a first build.
Pod RBA decks
The Geek Vape Aegis Boost RBA pod is worth calling out on its own. It replaces the stock coil inside a pod kit with a small rebuildable deck, so you can build for a device you already own without buying a mod and a full sized atomiser to go with it.
Reading a tank listing properly
Four specifications tell you almost everything you need. Coil range in ohms tells you whether it is a mouth to lung or a sub ohm design. Wattage range has to sit inside what your mod can deliver. Diameter in millimetres decides whether the tank overhangs your mod. Fill method matters more than people expect, because a sliding or hinged top fill is far easier to live with than a cap that unscrews completely.
What to buy for your experience level
A first tank should be a stock coil sub ohm or MTL design with widely available heads. There is nothing to learn beyond priming and filling it. The second step is a single coil RTA, which cuts running costs sharply once you are comfortable wicking. An RDA is a third step and suits people who want maximum flavour and are happy to drip. Mechanical mods and complex dual coil builds sit outside all of this and demand a working understanding of battery safety.
Getting the best from a new tank
Prime every new coil head by wetting the cotton through the ports before you fill, then leave the assembled tank standing for five minutes. Start at the lowest wattage printed on the coil and work up in two watt steps until the flavour peaks. Keep the airflow more open than feels natural at first, because restricting airflow on a sub ohm coil raises coil temperature and scorches cotton.
Rinse the glass and the chimney in warm water whenever you swap flavours. Residue from a heavy dessert liquid will taint a light fruit for days otherwise.
Rules that apply to tanks sold in the UK
Vape tanks intended for nicotine containing e-liquid are limited to 2ml capacity under the Tobacco and Related Products Regulations. Bottles of nicotine e-liquid are limited to 10ml and nicotine strength to 20mg per ml. All hardware here is sold to adults aged 18 and over only.
Delivery and support
UK delivery is free on orders over £20. If you want a straight recommendation between two tanks on this page, call the team on 07827 210361 between 8.30am and 4.00pm.
Popular tank questions answered
What makes a tank a best seller?
In this category it is almost always coil availability and price rather than novelty. A tank whose replacement heads are cheap and widely stocked stays useful for years, which is why long running families keep selling. Forgiving build decks and simple top fill designs also drive repeat orders.
Should I buy a sub ohm tank or a mouth to lung tank?
It depends on the draw you want and the liquid you use. A mouth to lung tank has tight airflow, coils above 1.0 ohm and suits 50/50 liquids or nicotine salts. A sub ohm tank has open airflow, coils below 1.0 ohm and needs a high VG shortfill at low nicotine strength. Former smokers usually prefer mouth to lung.
Is a rebuildable worth it for a first tank?
Usually not as a first purchase. Start with a stock coil tank so you learn priming, filling and wattage without also learning to build. Once that is second nature a single coil RTA will cut your running costs sharply, because wire and cotton cost a fraction of what coil heads do.
What size tank fits my mod?
Measure the top plate of your mod. Most mods take 22mm to 25mm tanks and anything wider will overhang. The connection itself is a 510 thread on virtually all current hardware, so fitment is really about diameter and height rather than the thread.
How do I stop a new coil tasting burnt?
Prime it. Wet the cotton visible through the ports with e-liquid, fit the coil, fill the tank and leave it standing for five minutes before the first draw. Then start at the low end of the printed wattage range. Firing a dry wick even once permanently damages the cotton.
Can I use the same tank on any mod?
Provided the thread is 510 and the mod can supply the wattage the coil needs, yes. Check that the coil resistance falls inside your mod's supported range. A very low resistance dual coil build may exceed what a small single battery mod can safely deliver.
Do you deliver tanks and rebuildables for free?
UK delivery is free on all orders over £20. Orders placed on working days are dispatched quickly. If you need to confirm that a tank clears the top of your mod before ordering, call 07827 210361 between 8.30am and 4.00pm.