Lost Vape Coils
Lost Vape is known in the UK for its Ursa and Thelema hardware and for the UB coil platform those devices run on. This collection holds the Lost Vape coil spares currently in stock, which is the Lost Vape UB Ultra Replacement Coils at £9.99, offered in three resistances: 0.15 ohm, 0.2 ohm and 0.3 ohm.
All three are sub ohm coils, meaning they sit below 1.0 ohm and are built for direct to lung vaping at higher power. That decides the e-liquid you put above them and how quickly you get through it, so choose the resistance deliberately.
Picking a resistance
0.15 ohm
The lowest resistance in the range pulls the most current and produces the warmest, densest vapour. It is the choice for wide open airflow and high wattage vaping where volume matters more than economy. It will drain a battery and empty a tank noticeably faster than the other two.
0.2 ohm
The middle option is the everyday sub ohm coil. It gives most of the vapour of the 0.15 ohm coil with a slightly cooler draw and a longer working life, which is why it tends to be the one people settle on after trying all three.
0.3 ohm
The highest resistance here runs coolest and is the most restrained on liquid and battery. If you want a restricted direct to lung draw rather than a fully open one or you find the lower resistances too warm, then start here.
Which e-liquid suits a sub ohm coil
Sub ohm coils need a thicker high VG liquid, commonly 70/30 VG to PG, because thin 50/50 juice will seep straight through the wicking ports and flood the coil. Nicotine strength should be low. Three milligrams or six milligrams per ml is the normal range, since a coil producing this much vapour delivers far more nicotine per puff than a mouth to lung setup. In the UK that means a shortfill with a nicotine shot added rather than a 20mg nic salt.
Priming and coil life
Wet the cotton through the wicking ports until it is visibly damp, screw the coil in, fill the tank and leave it standing for five minutes. Begin at the bottom of the printed wattage range and creep upwards until the flavour is where you want it. Firing a fresh coil at full power before the wick has saturated is the fastest way to ruin it.
A sub ohm coil in daily use typically lasts one to two weeks. Sweet dessert and candy shortfills shorten that because the sucralose in them caramelises onto the mesh, while fruit and menthol blends are much gentler. Keep the tank topped up, because a low tank is the most common cause of a dry hit.
Fitment and genuine parts
UB Ultra coils are made for the Lost Vape devices designed around that coil family. They are not cross compatible with coils from other manufacturers even where the diameter looks similar. Buying genuine coils also keeps you clear of the counterfeit market, where printed resistances are frequently inaccurate.
Delivery and support
UK delivery is free on orders over £20. Coils are small and light, so pairing them with your next bottle of e-liquid is the usual way to reach the threshold. If you need to confirm which coil family your Lost Vape device takes, call 07827 210361 between 8.30am and 4.00pm.
Lost Vape coil questions
Which Lost Vape coils are in stock?
The collection currently holds the Lost Vape UB Ultra Replacement Coils at £9.99 in 0.15 ohm, 0.2 ohm and 0.3 ohm. All three are sub ohm coils intended for direct to lung vaping at higher wattage with a high VG e-liquid. Other Lost Vape coil families are not live in this collection at the moment.
What is the difference between 0.15, 0.2 and 0.3 ohm?
Lower resistance means more current and a warmer, denser vape. The 0.15 ohm coil is the hottest and the thirstiest on both liquid and battery. The 0.2 ohm coil is the everyday middle ground. The 0.3 ohm coil runs coolest and lasts longest, so it suits a slightly restricted direct to lung draw.
What e-liquid should I use with UB Ultra coils?
Use a high VG shortfill, typically 70/30 VG to PG, at a low nicotine strength of 3mg or 6mg per ml. Thin 50/50 liquid leaks through the wicking ports of a sub ohm coil. High strength nic salt is unsuitable because a sub ohm coil delivers far more vapour per puff and 20mg would be unpleasantly harsh.
How long do Lost Vape coils last?
One to two weeks is normal in daily use. Sweetened dessert and candy e-liquids cut that down because sucralose caramelises onto the coil and blocks the wick. Fruit and menthol blends are far kinder. Flat flavour, reduced vapour and a harsh edge on the inhale are the signals that a coil is finished.
How should I prime a new coil?
Drip e-liquid onto the cotton showing through the wicking ports until it looks damp, fit the coil into the tank, fill the tank and let it stand for five minutes. Start at the lowest wattage printed on the coil and work up gradually. This one habit does more for coil life than anything else.
Are these genuine Lost Vape coils?
Yes. These are genuine Lost Vape UB Ultra coils supplied through the normal UK trade channel. Counterfeit coils are a real problem in vaping because resistance can be printed inaccurately, which leaves your device firing at the wrong power. If you need help identifying the coil family your device uses, call 07827 210361 between 8.30am and 4.00pm.